Turbines

Items prefixed with 8T or 12T are currently for sale only as part of an 8′ or 12′ diameter Wind Turbine Starter Kit. With the exception of the Slip Ring, the items in the kit are some of the core items for a Home Built (DIY) Wind Turbine based on Hugh Piggott’s “A Wind Turbine Recipe Book”, see “ScoraigWind.COM”. A copy of the book is included with the first 6 Starter Kits sold.

8T – 7 Starter Kits – One set of 3 fiberglass turbine blades for a 300W to 600W, 8′ diameter turbine. 24 + 3 Neodymium Rare Earth Magnets. One 10 Pound Roll of Magnet Wire. One Mercotac 230, 2 conductor, 250V, 30A electrical conducting rotating slip ring. Stub axle hub assembly. Retail $792, priced at $555 cash per kit.

8T – One set of 3 high efficiency, light weight, load balanced, fiberglass reinforced wind turbine blades for a 300W to 600W, 8′ diameter wind turbine. Retail $100, priced at $80 cash for a set of 3.

8T – One 4 Stud Hub Assembly with 4″ stud circle, 1,250 pound capacity. Includes axle, hub, bearings, seal, axle nut, dust cap and cotter key. Retail $36, priced at $30 cash.

8T – 24 + 3 Neodymium Rare Earth Magnets, 2″ X 1″ X 1/2″ block, magnetized through the 1/2″ thickness, N42 per Hugh Piggott’s wind generator design. Retail $17 each, total retail $459, priced at $365 cash for 27 magnets.

8T – One 10 Pound Roll of Magnet Wire, current stock includes 4 – 21 gage, 8 – 15 gage, 14 – 14 gage rolls, includes 10′ of 14 gage 19/W/THHN for interconecting stator coils. Retail $142, priced at $115 cash.

8T – One Mercotac 230, 2 conductor, 250V, 30A electrical conducting, rotating slip ring for rectifying wild AC on the turbine. Retail $55, priced at $45 cash.

12T – 7 Starter Kits – One set of 3 fiberglass turbine blades for a 2000W to 3000W, 12′ diameter turbine. 32 + 4 Neodymium Rare Earth Magnets. One 10 Pound Roll of Magnet Wire. One Mercotac 330, 3 conductor, 250V, 30A electrical conducting rotating slip ring. Stub axle hub assembly. Retail $1133, priced at $800 cash per kit.

12T – One set of 3 high efficiency, light weight, load balanced, fiberglass reinforced wind turbine blades for a 2000W to 3000W, 12′ diameter wind turbine. Retail $230, priced at $185 cash for a set of 3.

12T – One 5 Stud Hub Assembly with 4.5″ stud circle, 1,750 pound capacity. Includes axle, hub, bearings, seal, axle nut, dust cap and cotter key. Retail $52, priced at $42 cash.

12T – 32 + 4 Neodymium Rare Earth Magnets, 2″ X 1″ X 1/2″ block, magnetized through the 1/2″ thickness, N42 per Hugh Piggott’s wind generator design. Retail $17 each, total retail $612, priced at $500 cash for 36 magnets.

12T – One 10 Pound Roll of Magnet Wire, current stock includes 4 – 21 gage, 8 – 15 gage, 14 – 14 gage rolls, includes 10′ of 14 gage 19/W/THHN for interconecting stator coils. Retail $142, priced at $115 cash.

12T – One Mercotac 330, 3 conductor, 250V, 30A electrical conducting rotating slip ring. Retail $97 each, priced at $78 cash.

140 Neodymium Rare Earth Magnets, 2″ X 1″ X 1/2″ block, magnetized through the 1/2″ thickness, N42 with pull force more than 72 lbs per Hugh Piggott’s wind generator design, see “ScoraigWind.COM”. Retail $17 each, sold in quantities of 10, total retail $170, priced at $130 cash for each quantity of 10.

10 sets of 3 Bridge Rectifiers, 600 Volt, 35 Amp. Retail $7 each, total retail $21 per set, priced at $15 cash for each set of 3.

6 Hubbell cable support grips, cable range 0.56″ – 0.73″, Hubbell catalog # 073041279. Retail $26.00 each, priced at $21 cash each.

Xantrex C40 Charge Controllers. The C40 may be configured for 12V, 24V, or 48V operation and can be used as a charge, diversion, or load controller. Retail $125 each, total retail $375, priced at $300 cash for the set of 3.

3 Mornintstar/TriStar TS-60 Charge Controllers. The TriStar charge controller can operate as charge, diversion or load controller in 12, 24 or 48 volt systems. Retail $275 each, total retail $825, priced at $665 cash for the set of 3.

100 ‘ of 10/3 SOOW Black flexible conductor. Retail $272, priced at $220 cash.